Wiring harnesses |cable wire harnesses Manufacturer -JETOSH

Wiring harnesses |cable wire harnesses Manufacturer -JETOSH

TEL: +86 400 766 3299
   + 86 18926500206

  • Skype
  • Facebook
  • Twitter
  • Google Plus
  • Linkedin
Location: 首页 » JETOSH News Center » Industry News » Factors Deteriorating Connector Performance

Factors Deteriorating Connector Performance

Back to list Source:JETOSH Browse:- Release date:2020-03-30 14:53:00【Big in Small

In real life use, what are the factors that affect the performance of connectors? If the performance of connectors in use deteriorates? How should we prevent and maintain them at this time? For this we need to have a deeper understanding of the connectors. Jetosh introduces several factors that commonly affect connector performance in life. I hope that it will be helpful to everyone after reading the following.


The bad contact of the connector is actually the pressure in the external cable itself. The contact must have a good structure and stable performance. If the structure of the contact is unreasonable, the material selection is improper, the mold is unstable, and there are problems such as processing and errors, these problems will make the use environment worse and the problem of poor contact will occur.

Insulator with good insulation performance It can allow the contacts to be arranged correctly, so that the contacts and the contacts or the contacts and the housing are insulated from each other. Therefore, he must have good electrical properties. Especially used in small connectors with relatively high density. On the surface of the complete set of insulators, there will be a lot of metal on the surface and inside, and then there will be dust on the surface. If the organic material dilutes the toxic other, it will have ionic conductive channels when it is dissolved in the water film.

If the solid insulation is not good, it will not provide insulation.because it can often provide good protection for the contacts, as well as the function of installation positioning and locking. If the fixing is not good, the momentary power failure will cause the product to disintegrate.

The above is the explanation of the factors that worsen the performance of the connector for Jetosh, so when purchasing connectors, you must choose a regular and guaranteed manufacturer. Jetosh believes it is a good choice.

  • ARES/CN G1703035Q
  • ARES/CN G1703035Q
  • Wiring harnesses |cable wire harnesses Manufacturer -JETOSH
  • E338704
  • Wiring harnesses |cable wire harnesses Manufacturer -JETOSH
  • Wiring harnesses |cable wire harnesses Manufacturer -JETOSH
Copyright © JETOSH INTERNATIONAL CO.,LTD  All Rights Reserved